Ejemplo: arduino esp32 getlocaltime time.h struct tm
#include <WiFi.h>
#include "time.h"
const char* ssid = "SSID";
const char* password = "PASS";
const char* ntpServer = "de.pool.ntp.org";
const long gmtOffset_sec = 3600;
const int daylightOffset_sec = 3600;
int second;
int minute;
int hour;
int day;
int month;
int year;
int weekday;
long current;
struct tm timeinfo;
/*
struct tm
{
int tm_sec; // Seconds [0,60].
int tm_min; // Minutes [0,59].
int tm_hour; // Hour [0,23].
int tm_mday; // Day of month [1,31].
int tm_mon; // Month of year [0,11].
int tm_year; // Years since 1900.
int tm_wday; // Day of week [0,6] (Sunday =0).
int tm_yday; // Day of year [0,365].
int tm_isdst; // Daylight Savings flag.
}
*/
void printLocalTime()
{
if(!getLocalTime(&timeinfo)){
Serial.println("Failed to obtain time");
return;
}
Serial.println(&timeinfo, "%A, %d %B %Y %H:%M:%S");
}
void setup()
{
Serial.begin(115200);
//connect to WiFi
Serial.printf("Connecting to %s ", ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println(" CONNECTED");
//init and get the time
configTime(gmtOffset_sec, daylightOffset_sec, ntpServer);
printLocalTime();
//disconnect WiFi as it's no longer needed
WiFi.disconnect(true);
WiFi.mode(WIFI_OFF);
}
void loop()
{
delay(1000);
printLocalTime();
second = timeinfo.tm_sec;
minute = timeinfo.tm_min;
hour = timeinfo.tm_hour;
day = timeinfo.tm_mday;
month = timeinfo.tm_mon + 1;
year = timeinfo.tm_year + 1900;
weekday = timeinfo.tm_wday +1;
Serial.print("Time from variables: ");
Serial.print(day);
Serial.print(".");
Serial.print(month);
Serial.print(".");
Serial.print(year);
Serial.print(" --- ");
Serial.print(hour);
Serial.print(":");
Serial.print(minute);
Serial.print(":");
Serial.println(second);
}
¡Haz clic para puntuar esta entrada!
(Votos: 0 Promedio: 0)